Burglar Alarm Panel Cooper Menvier Scantronic 9448

Hard wired alarm system

The control panel has 7 zones of protection, day LED, 10 event log, 2 communication outputs (for speech dialler) and a programmable fire zone. A global anti-temper zone has been incorporated with a provision for 3 outputs, bell, strobe, PIR set latch and shock sensor reset. 

Technical Specification

• Zones 7 closed circuit (zone 7 pre-programmed as entry/exit)
• Zone Attributes Personal attack, normal alarm, chime, omit, not used, part set omit, fire, entry route
• Panel 9448EUR-90 style = control panel with on-board tactile illuminated rubber keypad
• Keypads Accepts up to 2 remote 9427 Style keypads
• Display 10 LED (Light Emitting Diode) indicators on control panel, inc. day (unset) LED
• Anti-Tamper Circuits Global
• Event Log 10 events recorded
• Zone Expansion No
• Full/Part Set Fully programmable part set option
• Compliance BS 4737
• Panel Speaker Yes
• Internal/Extension Speaker 1 x 32 Ohm internal speaker, accepts 1 x 16 Ohm external speaker
• Outputs Bell and strobe 500mA open collector. 1 programmable 100mA as PIR set latch or shock sensor reset
• Bell Duration Programmable up to 20 minutes
• Entry/Exit Times 5 programmable entry and exit times
• Battery 2.1Ah lead acid gel type rechargeable
• 12V Power Quiescent - Panel = 55mA. Keypad = 20mA
• Aux DC Power 500mA @ 13.8v
• Dimensions Control panel (H x W x D) = 212 x 212 x 68mm. Keypad (H x W x D) = 115 x 115 x 28mm
• Weight Control panel 1.2kg
• Temperature Range -10°c to +55°c
• Communication Output Personal Attack (PA) and burg (for speech diallers only)
• Compatibles Control panel operates with most detectors, bells and sirens

Extra keypad needed?

Please look at our 9427 keypad available for this system.